|
 |
|
|
Electrodyne 511
two-band inductor eq: |
|
-
Input: Active balanced discrete transistor impedance converter.
-
Output impedance: 150 ohms
-
+/-12 db gain range: Equalize or Attenuate
-
4 frequencies selectable per band. LF: 40, 100, 250, 500hz. HF: 1.5k, 3k, 5k,10k.
-
Peak/Shelf function on each band. Shelving at all frequencies, Peaking at 250, 500, 1.5k, 3k and 5k.
-
Distortion: 0.03%typical
-
Maximum output: +30db at less than 0.8%thd. (+29.5db at 0.06%thd)
-
Frequency response: +/- 0.25db, 10hz to 70khz typical
-
Signal to noise: -85db typ
|
Electrodyne 501 |
-
Maximum Gain: 68db. Adjustable over 50db in 2db steps with two ranges using 20db pad.
-
Output level control: Infinitely adjustable from 0 (off) to +6db over unity.
-
Input impedance: Microphone, 50 / 200 ohms selectable. DI, over 7 megohms.
-
Output impedance: 150 ohms
-
Distortion: 0.02%typical over entire gain range.
-
Maximum output: +30db at less than 0.8%thd. (+29.5db at 0.06%thd)
-
Frequency response: +/- 0.25db, 10hz to 60khz.
-
Signal to noise: -80db typ, -60db at absolute maximum gain.
-
Clip indicator: Monitors all three amp stages and illuminates when any stage is 3db from clip.
|
|
|
|
